10 85inch E Paper Hat Manual Waveshare Wiki
Do you have a question about the 10.85inch e-Paper (G) and is the answer not in the manual? CSB(CS):从机片选信号,低电平有效,为低电平的时候,芯片使能。 SCL(SCK/SCLK):串行时钟信号。 D/C(DC):数据/命令控制信号,低电平时写入命令(Command);高电平时写入数据(Data/parameter)。 SDA(DIN):串行数据信号。 时序:CPHL=0,CPOL=0,即 SPI 模式0。 【备注】具体关于SPI通信的相关信息,可以自行网上搜索资料了解。 本产品使用的电子纸采用“微胶囊电泳显示”技术进行图像显示,其基本原理是悬浮在液体中的带电纳米粒子受到电场作用而产生迁移。电子纸显示屏是靠反射环境光来显示图案的,不需要背光,在环境光下,电子纸显示屏清晰可视,可视角度几乎达到了 180°。因此,电子纸显示屏非常适合阅读。 对于计算机而言,它的数据存储方式是高位在前,低位在后,且一个字节只有8个位,因此会有一点改变: 这样只需要2个字节即可表示16个像素点了。 10.85inch e-Paper 是一块双IC控制的墨水屏,除了上述的编程原理外,还要注意一下以下内容 连接树莓派的时候,可以直接将板子插到树莓派的 40PIN 排针上去,注意对好引脚。 如果是选择用 10PIN 排线连接的话,请参考下方的引脚对应表格:
Part No.:10.85inch e-Paper HAT+ is the device which is supplied.* for reference only, the Raspberry Pi is NOT included. Raw display: 270.56 × 105.92 × 1.20 (mm) Standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards, Jetson Nano Onboard SPI Control Interface For use with Controller Boards like Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32 Data / Command selection (high for data, low for command)
People Also Search
- 10.85inch e-Paper HAT+ Manual - Waveshare Wiki
- WAVESHARE 10.85INCH E-PAPER (G) USER MANUAL Pdf Download
- Waveshare 29790, 10.85 inch e-Paper display, e-ink display, 1360 × 480 ...
- 10.85inch e-Paper HAT+ (G) Manual - Waveshare Wiki
- Waveshare 10.85inch e-Paper (G) Manuals | ManualsLib
- PDF 10.85inche-Paper UserManual
- 10.85inch e-Paper HAT+ - Waveshare Wiki
- Amazon.com: Waveshare 10.85inch e-Paper Display, Compatible with ...
Do You Have A Question About The 10.85inch E-Paper (G)
Do you have a question about the 10.85inch e-Paper (G) and is the answer not in the manual? CSB(CS):从机片选信号,低电平有效,为低电平的时候,芯片使能。 SCL(SCK/SCLK):串行时钟信号。 D/C(DC):数据/命令控制信号,低电平时写入命令(Command);高电平时写入数据(Data/parameter)。 SDA(DIN):串行数据信号。 时序:CPHL=0,CPOL=0,即 SPI 模式0。 【备注】具体关于SPI通信的相关信息,可以自行网上搜索资料了解。 本产品使用的电子纸采用“微胶囊电泳显示”技术进行图像显示,其基本原理是悬浮在液体中的带电纳米粒子受到电场作用而产生迁移。电子纸显示屏是靠反射环境光来显示图案的,不需要背光,在环境光下,电子纸显示屏清晰可视,可视角度几乎达到...
Part No.:10.85inch E-Paper HAT+ Is The Device Which Is Supplied.*
Part No.:10.85inch e-Paper HAT+ is the device which is supplied.* for reference only, the Raspberry Pi is NOT included. Raw display: 270.56 × 105.92 × 1.20 (mm) Standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards, Jetson Nano Onboard SPI Control Interface For use with Controller Boards like Raspberry Pi / Jetson Nano / Arduino / STM32 / ESP32 Data / Command selectio...